Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-841002.png)
NOTICE:
^
The serrate part of the select cable point should face upward when the select cable point is connected.
^
the clip should be inserted to the direction shown in the illustration.
NOTICE:
^
The projecting part of the cable outer should face upward when the select cable is installed.
^
Make sure that after installation the cable outer lock is projecting from A shown in the illustration.
12. INSTALL AIR DUCT REAR NO.2
13. INSTALL AIR DUCT REAR NO.1
14. REMOVE CONSOLE BOX FRONT
15. REMOVE RR CONSOLE BOX
16. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY
