Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-1553001.png)
Mud Flap: Technical Service Bulletins
Body - Mudguard Installation
REF.: ACCESSORIES
NO.: AX92-002
DATE: MARCH 20,1992
MODEL: SK/VK WAGON
1992 CAMRY WAGON MUDGUARD INSTALLATION INSTRUCTIONS
A mudguard kit is now available for installation on 1992 Camry Wagons. Be sure to thoroughly clean all attachment areas before installation and
carefully follow the steps below.
INSTALLATION PROCEDURE:
Front of Vehicle:
1.
Remove screws "l" and "2" securing the front fender protector and liner to the fender well (see Figure 1).
2.
Insert grommet (supplied in the kit) into the hole at point "A" at the bottom of the fender well (see Figure 2).
3.
Using a screw (supplied in the kit), install the mudguard at point "A", at the bottom of the fender well (see Figure 3).
