Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
-
Install dust boots and sliding bushing
-
lnstall the dust boots into the brake cylinder.
-
Insure that the boot is secured firmly to the brake cylinder groove.
-
Install the bushing into the boots.
-
Insure that the boot is secured firmly to the bushing groove.
REINSTALL CALIPER
-
Install pads
-
Install cylinder
-
Install flexible hose to brake cylinder
-
Set the flexible hose and new gaskets in position and install the union bolt.
Torque: 30 Nm (22 ft lb)