Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-1003003.png)
6. REMOVE SNAP RING
Using a snap ring expander, remove the snap ring.
7. REMOVE NO.1 HUB SLEEVE ASSEMBLY AND FIRST GEAR
Using a press, remove the NO.1 hub sleeve and 1st - gear.
8. REMOVE SYNCHRONIZER RING AND NEEDLE ROLLER BEARINGS
9. REMOVE OUTPUT SHAFT FRONT BEARING
Using SST, remove the output shaft front bearing.
SST 09950-00020, 09950-00030
OUTPUT SHAFT COMPONENT PARTS INSPECTION
1. INSPECT SYNCHRONIZER RING FOR FIRST GEAR
a. Check for wear or damage.
b. Check the braking effect of the synchronizer ring. Turn the synchronizer ring in one direction while pushing it to the gear cone and check that
the ring is locked.