Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
![background image](/toyota/camry_sedan_2-door/v6-3.0l_(1mz-fe)/Page-1567001.png)
Front Door Window Regulator: Service and Repair
WINDOW REGULATOR REPLACEMENT
For window regulator R&R see door service and repair. See:
1. REMOVE COVER PLATE
a. Screw Type: Remove the 2 screws and remove the cover plate.
HINT: The screws and cover plate can be used again.
Crimped Type:
HINT: Tape a screwdriver tip before use.
Using the screwdriver, pry up the cover plate tab and remove the cover plate.
NOTICE: Do not damage the motor housing.
HINT: The cover plate is not usable.
b. Remove the drum and wire guide from motor.
NOTICE: Do not use a screwdriver etc. to help remove them.
2. INSTALL WINDOW REGULATOR