Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
14. REMOVE NO.2 TIMING BELT COVER
Remove the 5 bolts and timing belt cover.
15. REMOVE ENGINE RH MOUNTING BRACKET
Remove the 2 bolts, nut and mounting bracket.
16. REMOVE TIMING BELT GUIDE
17. SET NO.1 CYLINDER TO TDC/COMPRESSION
a. Temporarily install the crankshaft pulley bolt to the crankshaft.
b. Turn the crankshaft and align the crankshaft timing pulley groove with the oil pump alignment mark.
NOTICE: Always turn the crankshaft clockwise.