Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
![background image](/toyota/camry_sedan_2-door/v6-3.0l_(1mz-fe)/Page-917002.png)
3. Remove emission control valve set.
4. Remove Fuel Pressure Control Vacuum Switching Valve (VSV)
^
Disconnect the 2 vacuum sensing hoses from the Fuel Pressure VSV.
^
Remove the screw and Fuel Pressure VSV.
Installation
1. Reinstall Fuel Pressure VSV.
^
Install the Fuel Pressure VSV with the screw.
2. Reinstall emission control valve set.
^
Connect the 2 vacuum sensing hoses to the Fuel Pressure VSV.
3. Reinstall V-bank cover. Using a 5 mm hexagon wrench. install the V-bank cover with the 2 cap nuts.
NOTE: When positioning the V-bank cover, push on the cover until a "click" is felt.
4. Reconnect Negative (-) Terminal Cable To Battery.