Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
![background image](/toyota/camry_sedan_2-door/v6-3.0l_(1mz-fe)/Page-961003.png)
5. Disconnect the air assist hose from the air pipe and block off the IAC Valve exit and the entry to the pipe.
6. Start the engine and check that the idle speed reaches 500 rpm or below (the engine may stall).
^
If the idle does not reach 500 rpm or below, check for a leak between the air pipe and injector.
7. Remove the jumper from the Data Link Connector 1. (SST 09843-18020)
8. Reconnect the air assist hose to the air pipe.