Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
4. REMOVE SUCTION PORT UNION
(a) Remove the bolt.
(b) Remove the 0-ring from the union.
5. 5S-FE Engine:
REMOVE AIR CONTROL VALVE
Remove the union bolt and gasket.
6. REMOVE PRESSURE PORT UNION, FLOW CONTROL VALVE AND SPRING
Remove the 0-ring from the union.
7. REMOVE REAR HOUSING
(a) Remove the 4 bolts.
(b) Remove the 2 0-rings from the housing.
8. REMOVE WAVE WASHER
9. REMOVE SIDE REAR PLATE
10. REMOVE GASKET
11. REMOVE CAM RING. 10 VANE PLATES AND VANE PUMP ROTOR
Using a screwdriver. remove the snap ring from the vane pump shaft.
NOTICE: Take care not to drop the plate.
12. REMOVE VANE PUMP SHAFT
13. REMOVE STRAIGHT PINS
Remove the 2 pins from the front housing.
POWER STEERING VANE PUMP INSPECTION AND REPLACEMENT
NOTICE: When using a vise, do not overtighten it.
1. MEASURE OIL CLEARANCE BETWEEN VANE PUMP SHAFT AND BUSHING