Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
(b) Coat a new oil seal lip with power steering fluid.
(c) Using a socket wrench (24 mm) and hammer, tap in the oil seal.
NOTICE: Make sure you install the oil seal facing the correct direction.
POWER STEERING VANE PUMP ASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT WITH POWER STEERING FLUID
2. INSTALL VANE PUMP SHAFT
3. INSTALL STRAIGHT PINS
Using a plastic hammer, tap in 2 new pins.
NOTICE: Be careful not to damage the pins.
4. INSTALL CAM RING
Align the holes of the ring and 2 straight pins, and install the ring with the inscribed mark facing outward.
5. INSTALL VANE PUMP ROTOR
(a) Install the rotor with the inscribed mark facing outward.
(b) Install a new snap ring to the vane pump shaft.
6. INSTALL VANE PLATES
Install the 10 plates with the round end facing outward.