Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
(c) Remove the 3 nuts of upper support.
Torque: 39 N.m (400 kgf.cm. 29 ft.lbf)
(d) Lower the rear axle carrier and remove the 2 bolts.
(e) Remove the shock absorber and coil spring.
REAR SHOCK ABSORBER DISASSEMBLY
REMOVE COIL SPRING
(a) Install a bolt and 2 nuts to the bracket at the lower portion of the shock absorber and secure it in a vise.
(b) Remove the cap.
(c) Using SST, compress the coil spring. SST 09727-30020.
NOTICE: Do not use an impact wrench. It will damage the SST.
(d) Using SST to hold the suspension upper support, remove the nut. SST 09729-22031
(e) Remove these parts:
-
Suspension upper support
-
Upper insulator
-
Coil spring
-
Spring bumper
-
Lower insulator