Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
11. REMOVE B3 APPLY PIPE
Pry up the pipe with a screwdriver and remove the pipe.
12. REMOVE VALVE BODY
a. Remove the 9 bolts.
b. Disconnect the throttle cable from the cam and remove the valve body.
13. REMOVE 2ND BRAKE APPLY GASKET
14. REMOVE SOLENOID VALVES
a. Remove the 3 bolts, shift solenoid valve No.1 and No.2 with the retainer.
NOTICE: When removing solenoid, do not use a screwdriver, etc. to pry up the solenoid.
b. Remove the O-rings from the shift solenoid valve No.1 and No.2.