Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
Electronic Brake Control Module: Service and Repair
ABS Computer And Deceleration Sensor
REMOVAL
1.
Remove computer cover.
2.
Remove the five screws holding the computer to the bracket.
3.
Pull wiring harness out of hold down clamps.
4.
Disconnect the three electrical connectors, and remove the ABS computer.
INSTALLATION
1.
Connect the three connectors and insert the wiring harness in clamps.
2.
Set the computer in place and install it with the five screws.
3.
Install the computer cover.