Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Control Module HVAC: Testing and Inspection
INSPECTION
Disconnect the amplifier and inspect the connector on the wire harness side, as shown in the chart.
Test conditions
-
Ignition switch : ON
-
Temperature control dial: MAX COOL
-
Blower dial : HI
If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other parts.
connect the connector to A/C amplifier and inspect wire harness side connector from the back, as shown.
Test conditions
-
Ignition switch : ON