Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
-
Install the WU-TWC with the 3 bolts and 2 new nuts.
Torque: 29 Nm (22 ft.lb)
-
Install the manifold stay with the bolt and nut.
Torque: 42 Nm (31 ft.lb)
-
Install the No.1 manifold stay with the bolt and nut.
Torque: 42 Nm (31 ft.lb)
-
Connect the sub oxygen sensor connector.
2. REINSTALL FRONT EXHAUST PIPE.
-
Place 2 new gaskets on the front and rear of the front exhaust pipe.
-
Temporarily install the 2 bolts and 2 new nuts holding the front exhaust pipe to the center exhaust pipe.
-
Using a 14 mm deep socket wrench install the 3 new nuts holding the front exhaust pipe to the WU-TWC.
Torque: 62 Nm (46 ft.lb)
-
Tighten the 2 bolts and nuts holding the front exhaust pipe to the center exhaust pipe.
Torque: 56 Nm (41 ft.lb)
-
Install the bracket with the 2 bolts.
3. CONNECT NEGATIVE (-) TERMINAL CABLE TO BATTERY.