Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
15. INSTALL VANE PUMP PULLEY
Using SST to stop the pulley rotating, torque the nut. SST 09960-10010 (09962-01000, 09963-01000)
Torque: 43 N.m (440 kgf.cm. 32 ft.lbf)
16. MEASURE PS VANE PUMP ROTATING TORQUE
POWER STEERING VANE PUMP INSTALLATION
1. INSTALL PS VANE PUMP ASSEMBLY
Temporarily tighten the 2 (A and B) bolts.
2. INSTALL DRIVE BELT
(a) Adjust drive belt tension.
(b) Torque the 2 (A and B) bolts.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
3. 5S-FE ENGINE:
CONNECT 2 VACUUM HOSES
4. CONNECT PRESSURE FEED TUBE
Torque the union bolt over a new gasket.
Torque: 51 N.m (625 kgf.cm, 38 ft.lbf)
HINT: Make sure the stopper of the tube is touching the front bracket, as shown, then torque the bolt.
5. CONNECT RETURN HOSE
6. INSTALL FRONT FENDER APRON SEAL RH
Tighten the 2 bolts.