Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
RH Drive Shaft - Using a press, remove the dust cover from the inboard joint shaft.
7. Disassemble inboard joint shaft (RH DRIVE SHAFT).
a. Using SST 09950-00020 and a press, remove the dust cover.
b. Using a snap ring expander, remove the snap ring.
c. Using a press, remove the bearing.
d. Remove the snap ring.
8. Remove No.2 dust deflector.
a. Mount outboard joint shaft in a soft jaw vise.
b. Using a screwdriver and hammer, remove the No.2 dust deflector.
CAUTION: Be careful not to damage the ABS speed sensor rotor.
Assembly
1. Install No.2 dust deflector. Using Special Service Tool (SST) 09309 - 36010, 09316 - 20011 and a press, install a new No.2 dust deflector.
2. Assemble inboard joint shaft (RH DRIVE SHAFT).
a. Install a new snap ring to the inboard joint shaft.