Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
5. Inspect electrode gap.
^
If the gap is greater than maximum. replace the Spark Plug.
Maximum electrode gap: 1.3 mm (0.051 in)
^
Correct electrode gap of new Spark Plug.
Gap: 1.1 mm (0.043 in)
NOTE: If adjusting the gap of a new spark plug, bend only the base of the ground electrode. Do not touch the tip. Never attempt to adjust the
gap on the used plug.
6. Clean Spark Plugs
^
If the electrode has traces of wet carbon, allow it to dry and then clean with a Spark Plug cleaner.
Air pressure: Below 588 kPa (85 psi).
Duration: 20 seconds or less.
NOTE: If there are traces of oil, remove it with gasoline before using the spark plug cleaner.
7. Install Spark Plugs
^
Using a 16 mm plug wrench, install the Spark Plug.
Torque: 18 N.m (13 ft lb)
8. Reinstall Ignition Coils.