Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
Position No. 1 gasket, No. 1 plate and then No. 2 gasket on the upper valve body (Figure 16).
3.
PLACE UPPER VALVE BODY WITH NO. 1 PLATE AND GASKETS ON LOWER VALVE BODY
CAUTION:
Hold the upper valve body, No. 1 plate and gaskets securely so they do not separate. Align each bolt hole in the valve body with the gaskets and
plate.
4.
INSTALL AND FINGER TIGHTEN BOLTS IN UPPER VALVE BODY TO SECURE LOWER VALVE BODY
Install and finger tighten the three bolts (Figure 18).
Note:
Each bolt length mm (in.) is indicated in the figure.
5.
INSTALL LOCK-UP RELAY VALVE SLEEVE STOPPER
6.
INSTALL UPPER VALVE BODY COVER GASKETS, PLATE AND THROTTLE MODULATOR OIL STRAINER
(a)
Position the gasket and plate and then the other gasket.