Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
(b)
Tighten the fourteen bolts in the upper valve body. Bolt Torque 6.6 N-m (67 kgf-cm, 58 in.lbf.).
13.
(a)
Place the check ball on No. 1 gasket.
(b)
Install the Bo accumulator assembly.
(c)
Install and torque the two bolts. Bolt Torque 6.6 N-m (67 kgf-cm, 58 in.lbf.)
14.
INSTALL SOLENOIDS
(a)
Coat the O-rings with ATF and install them to the solenoids.
(b)
install the lock-up solenoid.
(c)
Install and torque the bolt.
Note:
Each bolt length mm (in.) is indicated in the figure. Bolt Torque 6.6 N-m (67 kgf-cm, 58 in.lbf.).
(d)
Install No. 1 and No. 2 solenoids.
(e)
Install and torque the three bolts.
Note:
Each bolt length mm (in.) is indicated in the figure. Bolt Torque 6.6 N-m (67 kgf-cm, 58 in.lbf.).
Install the valve body into the transmission assembly.
Note:
Properly torque valve body bolts and transmission oil pan bolts to the specified torque specification to ensure a correctly performed repair.