Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
Bolt length:
Bolt A: 14 mm (0.551 inch)
Bolt B: 37 mm (1.457 inch)
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
b. Check that the manual valve lever is touching the center of the detent spring tip roller.
c. Using a plastic hammer, install the pipe into the position.
NOTICE: Be careful not to bend or damage the pipe.
d. Install and torque the bolt.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
22. CONNECT SOLENOID CONNECTORS
23. INSTALL OIL PIPES
Using a plastic hammer, install the pipes into the positions.
NOTICE: Be careful not to bend or damage the pipes.
24. INSTALL OIL STRAINER AND APPLY PIPE BRACKET
a. Install the oil strainer and apply pipe bracket.
b. Install and torque the 6 bolts.
Torque:
Bolt A: 10 Nm (100 kgf-cm, 7 ft. lbs.)
Bolt B: 11 Nm (110 kgf-cm, 8 ft. lbs.)
Bolt length:
Bolt A: 22 mm (0.866 inch)
Bolt B: 53 mm (2.087 inch)