Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
5. REMOVE SNAP RING
Using a snap ring expander, remove the snap ring.
6. REMOVE NO.2 HUB SLEEVE ASSEMBLY, 3RD GEAR SYNCHRONIZER RING AND NEEDLE ROLLER BEARINGS
Using SST and a press, remove the No.2 hub sleeve, 3rd gear, synchronizer ring and needle roller bearings.
SST 09950-00020
NOTE: Be careful not to confuse the synchronizer ring for 3rd gear and synchronizer ring for 4th gear.
7. REMOVE NO.2 HUB SLEEVE, SHIFTING KEYS AND SPRINGS FROM NO.2 CLUTCH HUB
Using a screwdriver, remove the 3 shifting keys and 2 springs from the No.2 clutch hub.
INPUT SHAFT COMPONENTS INSPECTION
1. INSPECT SYNCHRONIZER RINGS
a. Check for wear or damage.
b. Check the braking effect of the synchronizer ring. Turn the synchronizer ring in one direction while pushing it to the gear cone. Check that the