toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Input Shaft, M/T|Service and Repair|Page 3800 > < Input Shaft, M/T|Service and Repair|Page 3798

Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)

Page 8
background image

d. Using SST and a press, install the rear ball bearing.

SST 09608-12010 (09608-00070)

6. INSTALL SNAP RING

a. Select a snap ring that will allow minimum axial play.

b. Using a screwdriver and hammer, tap in the snap ring.

Input Shaft, M/T|Service and Repair|Page 3800 > < Input Shaft, M/T|Service and Repair|Page 3798