toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1474 > < Initial Inspection and Diagnostic Overview|Page 1472
Page 3
background image

c. Remove the No.1 cooling fan.

1. Disconnect the cooling fan connector.
2. Disconnect the ECT switch connector.
3. Remove the 2 bolts, and disconnect the cooling fan from the radiator. 
4. Disconnect the connector holder and wire for the ECT switch from the fan shroud, and remove the cooling fan.

2. REMOVE NO.2 COOLING FAN

a. Disconnect the cooling fan connector.
b. Remove the 2 bolts and cooling fan.

DISASSEMBLY

1. REMOVE FAN

Remove the nut and fan.

2. No.2 Cooling Fan: REMOVE FAN MOTOR COVER

Remove the 2 screws and motor cover.

3. REMOVE FAN MOTOR

a. Disconnect the wire and connector holder from the fan shroud.
b. Remove the 3 screws and fan motor.

REASSEMBLY

1. INSTALL FAN MOTOR

Initial Inspection and Diagnostic Overview|Page 1474 > < Initial Inspection and Diagnostic Overview|Page 1472