toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Module HVAC > < Compressor Clutch Relay|Testing and Inspection
Page 1
background image

Condenser Fan Motor Relay: Testing and Inspection

Condenser Fan Relay

1. REMOVE CONDENSER FAN RELAYS FROM NO.5 RELAY BLOCK

2. INSPECT NO.2 COOLING FAN RELAY (Marking: FAN No.2) CONTINUITY

If continuity is not as specified, replace the relay.

3. INSPECT NO.3 COOLING FAN RELAY (Marking: FAN No.3) CONTINUITY

If continuity is not as specified, replace tile relay.

Control Module HVAC > < Compressor Clutch Relay|Testing and Inspection