toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Back-Up Light <--> [Backup Lamp] > < Automatic Light Control Sensor <--> [Ambient Light Sensor]|Testing and Inspection
Page 2
background image

a. Disconnect the connector from the sensor and inspect the connector on the wire harness side, as shown in the chart.

If circuit is as specified, perform the inspection on the following page.
If the circuit is not as specified, inspect the circuit connected to other parts.

b. Connect the wire harness side connector to the sensor and inspect wire harness side connector from the back side.

HINT:
-

Ignition switch ON.

-

Light control switch OFF.

-

Vehicle's surroundings are bright.

If circuit is as specified, try replacing the sensor with a new one.
If the circuit is not as specified, inspect the circuit connected to other parts.

Back-Up Light <--> [Backup Lamp] > < Automatic Light Control Sensor <--> [Ambient Light Sensor]|Testing and Inspection