Camry Solara SE V6-3.0L (1MZ-FE) (2001)
4. REMOVE QUARTER TRIM
a. Remove the bolts and front seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
b. Remove the 4 screws.
c. RH side:
Disconnect the courtesy light connector.
d. Remove the quarter trim.
e. Employ the same manner described above to the other side.
5. REMOVE QUARTER BELT WEATHERSTRIP
a. Remove the 2 screws and quarter belt weatherstrip.
b. Employ the same manner described above to the other side.
6. REMOVE UPPER QUARTER WINDOW MOULDINGS AND BACK BELT MOULDING
a. Remove the 4 screws from the back belt moulding.
b. Using a torx wrench, remove the 2 screws from the lower side of the back belt moulding and upper quarter widow moulding.
c. Remove the back belt moulding.
d. Remove the 2 nuts from lower side of the upper quarter window moulding.