toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Alarm Horn|Testing and Inspection|Page 4618 > < Accessories and Optional Equipment|Locations|Page 4613
Page 1
background image

Alarm Horn: Testing and Inspection

Theft Deterrent Horn Circuit

CIRCUIT DESCRIPTION

When the theft deterrent system is activated, the relay in the ECU turns ON and OFF cycles of approximately 0.2 Sec., causing the theft deterrent horn
to blow (See the wiring diagram).

In this condition, if any of the following operations is done, the relay in the ECU turns OFF, thus stopping the theft deterrent horn from blowing:

1. Unlock the front LH or RH door with key.
2. Turn the ignition switch to ACC or ON position.
3. Unlock the doors with the wireless door lock control system.
4. Wait for approximately 60 seconds.
5. Push the panic switch of the wireless door lock control system.

Wiring Diagram

Alarm Horn|Testing and Inspection|Page 4618 > < Accessories and Optional Equipment|Locations|Page 4613