Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
![background image](/toyota/camry_solara_slev6/v6-3.0l_(1mz-fe)/Page-393004.png)
b. Disconnect the lead wire from the fan shroud.
c. Remove the 3 screws and fan motor.
2. REMOVE NO.2 COOLING FAN
a. Remove the clip and fan.
NOTICE: When removing the clip and fan, do not apply too much force to the motor shaft and do not scratch the motor shaft.
HINT: At the time of installation, please refer to the following items.
Install a new clip from the side opposite the protrusion on the fan.
b. Disconnect the lead wire from the fan shroud.