Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
Radiator Cooling Fan Motor Relay: Testing and Inspection
INSPECTION
1. REMOVE RELAY BOX COVER
2. INSPECT NO.1 COOLING FAN RELAY
a. Remove the No.1 cooling fan relay. (Marking: FAN NO.1)
b. Inspect the No.1 cooling fan relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is continuity between terminals 3 and 4.
If there is no continuity, replace the relay.
c. Inspect the No.1 cooling fan relay operation.
1. Apply battery positive voltage across terminals 1 and 2.
2. Using an ohmmeter, check that there is no continuity between terminals 3 and 4.
If there is continuity, replace the relay.
d. Reinstall the No.1 cooling fan relay.
3. INSPECT NO.2 COOLING FAN RELAY
a. Remove the No.2 cooling fan relay. (Marking: FAN NO.2)