toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Assembly, HVAC|Removal and Installation|Page 4236 > < Control Assembly, HVAC|Removal and Installation|Page 4234
Page 3
background image

d. Connect air mix damper control cable.

1. Set the temperature control dial to "MAX. COOL" position.
2. Set the cable connector to air mix link pin on left side of A/C unit and clamp the cable outer on.

HINT:  It is unnecessary to push or pull outer cable.

e. After connection, check the heater control dial operation.

2. INSTALL LOWER LH INSERT
3. INSTALL LOWER NO.1 PANEL
4. INSTALL COWL SIDE TRIM LH
5. INSTALL FRONT DOOR SCUFF PLATE LH

Control Assembly, HVAC|Removal and Installation|Page 4236 > < Control Assembly, HVAC|Removal and Installation|Page 4234