Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
/Page-616002.png)
Using an ohmmeter, check that there is continuity between the terminals.
Resistance: 27 - 33 Ohms at 20 °C (68 °F)
If there is no continuity, replace the VSV.
4. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between each terminal and the body.
If there is continuity, replace the VSV.
5. INSPECT VSV OPERATION
a. Check that air flows with difficulty from port E to port F.
b. Apply battery positive voltage across the terminals.
