Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
Remove the terminal nut, wave washer, terminal insulator (outside), O-ring, terminal bolt, contact plate and terminal insulator (inside).
3. Terminal 30:
Remove the terminal nut, wave washer, terminal insulator (outside), packing, O-ring, terminal bolt, contact plate, and terminal insulator
(inside).
d. Temporarily install these new terminal 30 kit parts:
1. Terminal insulator (inside)
2. Contact plate
3. Terminal bolt
4. O-ring
5. Packing and terminal insulator (outside) Install the packing to the terminal insulator, and install them.
HINT: Match the protrusion of the insulator with the indentation of the housing.
6. Wave washer
7. Terminal nut
NOTE: Be careful to install the terminal insulators (Inside) and wave washers in the correct direction.
e. Temporarily install these new terminal C kit parts:
1. Terminal insulator (inside)
2. Contact plate
3. Terminal bolt
4. O-ring
5. Terminal insulator (outside)
6. Wave washer
7. Terminal nut
NOTE: Be careful to install the terminal insulators (inside) and wave washers in the correct direction.
f.
Temporarily tighten the terminal nuts.
g. Tighten terminal nuts.