Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
7. INSTALL GASKET
Install a new gasket.
8. INSTALL SIDE REAR PLATE
Align the holes of the plate and 2 straight pins.
9. INSTALL WAVE WASHER
Install the washer so that its protrusions fit into the slots in the side rear plate.
10. INSTALL REAR HOUSING
(a) Coat 2 new 0-rings with power steering fluid.
(b) Install the 2 0-rings to the housing.
(c) Torque the 4 bolts.
Torque: 17 N.m (170 kgf.cm, 12 ft.lbf)
11. INSTALL SPRING, FLOW CONTROL VALVE AND PRESSURE PORT UNION
(a) Install the valve facing the correct direction.
(b) Coat a new 0-ring with power steering fluid.
(c) Install the 0-ring to the union.
(d) Torque the union.
Torque: 83 N.m (850 kgf.cm, 62 ft.lbf)
12. 5S-FE Engine:
INSTALL AIR CONTROL VALVE
Torque the union bolt over a new gasket.
Torque: 69 N.m (700 kgf.cm. 51 ft.lbf)
13. INSTALL SUCTION PORT UNION
(a) Coat a new 0-ring with power steering fluid.
(b) Install the 0-ring to the union.
(c) Torque the bolt.
Torque: 13 N.m (130 kgf.cm. 9 ft.lbf)
14. INSTALL FRONT AND REAR BRACKETS
Torque the 3 bolts and 2 nuts.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)