Camry Wagon L4-2.0L (3S-FE) (1990)
![background image](/toyota/camry_wagon/l4-2.0l_(3s-fe)/Page-1369003.png)
(a) Wind the glass down into the door cavity.
(b) Remove the two glass channel mounting nuts.
(c) Remove the door glass by pulling it upward.
8. REMOVE WINDOW REGULATOR
(a) (w/ Power Window) Disconnect the connector.
(b) Remove the regulator mounting bolts.
(c) Remove the equalizer arm bracket mounting bolts.
(d) Remove the regulator through the service hole.
9. REMOVE REAR DOOR BELT MOULDING
Pry out the rear door belt moulding with the clip as shown.