Camry Wagon L4-2.0L (3S-FE) (1990)
4 WD
(4WD) Remove the bolt, nut, ground strap and mounting stay.
9. SLIGHTLY JACK UP ENGINE
Raise the engine enough to remove the weight from the engine mounting on the right side.
10. REMOVE ENGINE RH MOUNTING INSULATOR AND BRACKET
2 WD
(2WD) Remove the four nuts, bolt and mounting insulator.
4 WD
(4WD) Remove through bolt, two nuts and mounting insulator.
Remove the three bolts and mounting bracket.
11. REMOVE SPARK PLUGS
12. REMOVE NO.2 TIMING BELT COVER
Remove the five bolts, belt cover and gaskets.