Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-1225005.png)
a. Put the shims to the pressure plate.
b. Using SST 07112-76060 and torque wrench, install the shaft bolt.
Torque: 13 Nm (9.7 ft lb)
4. Check the clearance between the pressure plate and rotor using thickness gauge.
Standard clearance: 0.5 +/- 0.15 mm (0.020 +/- 0.0059 in.)
If the clearance is not within tolerance, charge the number of shims to obtain the standard clearance.
