Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-1471006.png)
(b) (USA) Remove the five bolts, the three screws and the two nuts.
(c) (CANADA) Remove the five screws.
(d) Remove the panel and disconnect the speaker connector.
13. REMOVE CENTER CLUSTER FINISH PANEL
(a) (USA) Remove the two screws.
(b) Remove the ash tray.
(c) Using a screwdriver, release the white plastic clip at the rear of the ash receptacle retainer.
HINT: Tape the screwdrier tip before use.
(d) Pull out the center cluster finish panel.
14. REMOVE RADIO AND STEREO
(a) Remove the four screws, radio and stereo.
(b) Disconnect the connectors and the antenna cable.