Camry Wagon L4-2.0L (3S-FE) (1990)
![background image](/toyota/camry_wagon/l4-2.0l_(3s-fe)/Page-223002.png)
2. Measure the toe-in.
If the left-right error is within specifications but the overall toe-in is not, lengthen or shorten both arms an equal amount by turning the two cams in
the opposite direction, until the adjustment standard is obtained.
Note: The toe-in will change about 1.5 mm (0.059 in.) for FWD, 4.5 mm (0.177 in.) for 4WD with each graduation of the cam (one side).