Camry Wagon L4-2.0L (3S-FE) (1990)
b. Press the piston into the drum with the cup side up, being careful not to damage the O-ring.
2. INSTALL PISTON RETURN SPRING
a. Install the return spring and set snap ring in place.
b. Place SST on the spring retainer, and compress the spring with a shop press.
SST 09350-32014 (09351-32070, 09351-32200)
c. Install the snap ring with a screwdriver. Be sure end gap of snap ring is aligned with the groove of the clutch drum.
3. INSTALL PLATES, DISCS AND FLANGE
Install in order: P = Plate D = Disc
Flange-D-P-D-Flange