Camry Wagon L4-2.0L (3S-FE) (1990)
11. REMOVE REAR BEARING
Using SST, press out the bearing.
SST 09950-00020
12. REMOVE OVERDRIVE PLANETARY RING GEAR FROM COUNTER DRIVE GEAR
a. While pulling up the ring gear, compress the snap ring with needle-nose pliers and remove it from the groove.
b. Remove the ring gear from the counter drive gear.
13. REMOVE OUTER RACES FROM COUNTER DRIVE GEAR
Drive out the two races with a brass bar and hammer.
14. REMOVE SNAP RING FROM COUNTER DRIVE GEAR
Using a screwdriver, remove the snap ring.