Camry Wagon L4-2.0L (3S-FE) (1990)
c. Lock the adjusting nut with one tab on locking washer. Bend the locking washer tab until it is even with the adjusting nut groove.
9. INSTALL NO.3 OVERDRIVE PLANETARY THRUST WASHER
10. INSTALL PINION SHAFT PLUGS
Install the four plugs into the pinion shaft.
11. INSTALL OVERDRIVE ONE-WAY CLUTCH AND RETAINING PLATE
a. Install the one-way clutch into the outer race.
b. Install the two retainer on both sides of the one-way clutch.