Camry Wagon L4-2.0L (3S-FE) (1990)
HINT: Count the number of adjusting rings before disassembly of the valve body because the throttle pressure is changed according to the
number. (Some of the valve bodies do not have any adjusting rings.)
2. REMOVE UPPER VALVE BODY COVER
Remove the nine bolts and upper valve body cover.
3. REMOVE STRAINER, GASKETS, PLATE AND SLEEVE STOPPER FROM UPPER VALVE BODY
a. Remove the strainer, two gaskets and plate.
b. Remove the sleeve stopper.
4. REMOVE BOLTS FROM UPPER VALVE BODY
Remove the three bolts from upper valve body.