Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Radiator Cooling Fan Motor: Service and Repair
Hydraulic Cooling Fan/Motor - Removal and Installation
Hydraulic Motor Removal
1. Disconnect cable from negative terminal of battery
CAUTION (w / Airbag): Work must be started after approx. 30 seconds or longer from the time the ignition switch turned to the "LOCK"
position and the negative (-) terminal cable is disconnected from the battery.
2. Drain engine coolant
3. Remove cruise control actuator cover