Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Compression Check: Testing and Inspection
COMPRESSION CHECK
HINT: If there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure.
1. WARM UP AND STOP ENGINE
Allow the engine to warm up to normal operating temperature.
2. DISCONNECT DISTRIBUTOR CONNECTOR
3. REMOVE V-BANK COVER
Using a 5 mm hexagon wrench, remove the two nuts and V-bank cover.
4. DISCONNECT HIGH - TENSION CORDS FROM SPARK PLUGS
Disconnect the high - tension cords at the rubber boot. DO NOT pull on the cords.
NOTICE: Pulling on or bonding the cords may damage the conductor inside.
5. REMOVE SPARK PLUGS
Using a 16 mm plug wrench, remove the spark plug.
6. CHECK CYLINDER COMPRESSION PRESSURE