Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
(c) Check that the pulley bracket moves smoothly.
4. INSTALL TIMING BELT
5. REMOVE ENGINE SLING DEVICE FROM ENGINE
6. (w/ A/C) INSTALL A/C COMPRESSOR BRACKET
Install the A/C compressor bracket with the three bolts.
7. (w/ A/C) INSTALL GENERATOR BRACKET
Install the generator bracket with the two bolts.
8. (w/ A/C) INSTALL WATER INLET PIPE
(a) Install a new 0-ring to the water inlet pipe.
(b) Install the water inlet with the the bolt.