Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Mode:
Fresh
Blower:
High
Temp:
Max Warm
Windows
Open
(b)
Insert spray nozzle into the filter inlet and spray the entire quantity (1 qt.) of freshener solution into the evaporator while moving the nozzle
around to cover the complete evaporator surface.
(c)
Turn the blower OFF.
6.
Reinstallation of Parts.
7.
Completion of Treatment.
(a)
Dry the evaporator for 30 minutes with the following settings:
AC:
Off
Air Outlet
Foot
Mode:
Recirc.
Blower:
High
Temp:
Max Warm
Windows:
Closed
(b)
If vehicle still has alcohol smell, open windows for ventilation. Do not turn on the AC switch until the evaporator is completely dry as this
can reduce the effectiveness of the solution.
CAUTION
Do not get Into the vehicle during this drying operation.
Camry ( SXV/VCV10)
1.
Removal of parts.
(a)
Pull down the carpet from the center console as indicated by the bigger arrow in the illustration.