Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-228007.png)
22. REMOVE CAMSHAFT TIMING PULLEYS
Using SST, remove the bolt, timing pulley and knock pin.
Remove the two timing pulleys.
SST:
RH 09249-63010 and 09276-54012
LH 09278-54012
HINT: Arrange the RH and LH pulleys.
23. REMOVE NO.2 IDLER PULLEY
Remove the bolt and idler pulley.
24. REMOVE CRANKSHAFT PULLEY
a. Using SST, remove the pulley bolt.
SST: 09213-54015, 09213-70010 (90105-08076) 09330-00021
HINT: (Re-using timing belt): When the crankshaft pulley bolt is loosened, the position of the timing mark of the crankshaft pulley and also the
installation mark may slip, so check and align them again.