Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Fuel Pressure Release: Service and Repair
FUEL PRESSURE RELEASE
-
Disconnect the cable from the negative (-) terminal of the battery.
CAUTION:
Work must be started after approx. 30 seconds or longer from the time the ignition switch is turned to the LOCK position and the negative (-)
terminal cable is disconnected from the battery.
-
Disconnect the cold start injector connector.
-
Put a suitable container or shop towel under the cold start injector pipe (No.2 fuel pipe).
Cold Start Valve Line
-
Slowly loosen the union bolt at the cold start injector pipe.
-
When complete, retighten the union bolt.
Torque: 15 N.m (150 kgf.cm. 11 ft.lbs)
-
Reconnect the cable to the negative (-) terminal of the battery.