Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-462001.png)
Circuit Opening Relay: Testing and Inspection
Circuit Opening Relay Inspection - Checking Continuity
Inspect Relay Continuity
- Using an ohmmeter, check that there is continuity between terminals ST and E1.
- Check that there is continuity between terminals IG and FC.
- Check that there is no continuity between terminals B and FP.
- If continuity is not as specified, replace the relay.
Circuit Opening Relay Inspection - Checking Operation
Inspect Relay Operation
- Apply battery voltage across terminals ST and E1.
- Using an ohmmeter, check that there is continuity between terminals B and FP.
- If operation is not as specified, replace the relay.
